[cisco-voip] Call back to recieved Call - Dialing 9 Problem

[Ramiz Sardar]

Hi Johan,

Thank you for replying. I got doc. on this problem

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml

Best Regards
Rameez

On Mon, Oct 13, 2008 at 11:11 AM, Johan Åhman <Johan.Ahman at tdc.se> wrote:

>  Hi
>
> You would have to add a prefix (the 9) on external incoming calls.
> There exists a serviceparamter for this(Incoming Calling Party National
> Prefix, under Device - PRI and MGCP Gateway) if you are  using an MGCP
> Gateway. If you use H323 I belive you need to add the 9 in the gateway.
>
> /Johan
>
>  ------------------------------
>  *Från:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *För *Ramiz Sardar
> *Skickat:* den 13 oktober 2008 09:01
> *Till:* cisco-voip
> *Ämne:* [cisco-voip] Call back to recieved Call - Dialing 9 Problem
>
>  Hi,
>
> I have IP telephony setup includes callmanager 4.3 with IP phones and 2811
> as voice gateway. I configured digit 9 to make offnet calls now the problem
> we are facing when someone from pstn call on DID number, calling number
> saves in received calls. User can not dial that number directly because of
> that 9 digit.
>
> Please suggest me the solution for this i believe this topic would already
> discussed but i couldn't find any post on it.
>
> Waiting for immediate response.
>
> Best Regards
> Rameez
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081013/4aaae99d/attachment-0001.html>