[cisco-voip] Graceful Shutdown in 6.1 when UPS?

[Ryan Ratliff]

I think it's going to depend on the version of CUCM.  The command  
'show ups status' is the easiest way to tell if the server will  
work.  I think prior to CUCM 7.1 you should confirm by the command  
above and by testing.  Prior to 7.1 we only tested it on the servers  
referenced in the release notes.

-Ryan

On Apr 22, 2009, at 12:21 PM, Samuel Womack wrote:

Curious about H3..isn't too extreme but recently had a customer whose
server went down because the UPS went down and then they lost config
and weren't doing DRS..they were actually using CUCBE and 7828..just a
mess..

On Wednesday, April 22, 2009, Ryan Ratliff <rratliff at cisco.com> wrote:
> Looks like the 7845H2 is supported but I'm tracking down external  
> docs to confirm this.
>
> -Ryan
>
> On Apr 22, 2009, at 11:09 AM, Samuel Womack wrote:
>
> ugghh!  Why isn't the 7845 H3 not supported with APC UPS and a  
> 7825/35 H2 Supported...Is a 7845H2 Supported?
>
> On 4/22/09, Ryan Ratliff <rratliff at cisco.com> wrote: http:// 
> tools.cisco.com/search/JSP/search-results.get? 
> strQueryText=communications+manager+ups&x=0&y=0&Search+All 
> +cisco.com=cisco.com&language=en&country=US&thissection=f&accessLevel= 
> Guest
>
> -Ryan
>
> On Apr 21, 2009, at 3:45 PM, Samuel Womack wrote:
>
> This has been Discussed Previously...is there a Doc out there that  
> talks about Supported Hardware for this to Occur..Namely MCS7845 H3?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>