[cisco-voip] Debug Incomming Call routing from MGCP Gateway[Scanned]

[Martin Bufton]

I have it working now thank you it was an issue with me using fractional
PRI on the mgcp. 

 

 

Martin Bufton BSc (Hons), CCNA - Systems Engineer

 

 

From: Jim Reed [mailto:jreed at swiftnews.com] 
Sent: 03 December 2009 18:13
To: Martin Bufton
Cc: cisco-voip
Subject: Re: [cisco-voip] Debug Incomming Call routing from MGCP
Gateway[Scanned]

 

POTS lines or PRI or...

Are you seeing Ring Detect on the voice ports on the gateway?
-- 
Jim Reed
Technology Wrangler
Swift Communications, Inc.
970-683-5646 (Direct)
775-772-7666 (Cell)

"Not only is it not right.
It's not even wrong."
       The Pauli Proverb
        Wolfgang Pauli


On 12/3/09 10:46 AM, "Martin Bufton" <m.bufton at spectra-group.co.uk>
wrote:

My incoming calls fail, as far as I can tell it doesn't even attempt to
run the Dial peer on the gateway

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091208/8005ff86/attachment.html>