[cisco-voip] How to determine the DID range on an ISDN line

[Alex Balashov]

That is provisioned on the service provider side solely.  There is no 
way to determine that from the gateway.

On 12/10/2009 01:23 AM, Aaron Riemer wrote:

> Hi guys,
>
> Is there an easy way to determine from a voice gateway what the DID
> number range is on a particular ISDN line E1 or can only the ISP give
> you this information?
>
> Just want to know if it’s possible.
>
> Thanks,
>
> Aaron.
>
>
> LEGAL DISCLAIMER: This message contains confidential information and is
> intended only for the individual named. If you are not the named
> addressee you should not disseminate, distribute or copy this e-mail.
> Please notify the sender immediately by e-mail if you have received this
> e-mail by mistake and delete this e-mail from your system. If you are
> not the intended recipient you are notified that disclosing, copying,
> distributing or taking any action in reliance on the contents of this
> information is strictly prohibited.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


-- 
Alex Balashov - Principal
Evariste Systems
Web     : http://www.evaristesys.com/
Tel     : (+1) (678) 954-0670
Direct  : (+1) (678) 954-0671