[cisco-voip] international calling

[Scott Voll]

Telco only excepts international type and no 011.  thus the reason to remove
the 011 and send the numbering type.

other thoughts?

Scott

On Wed, Dec 30, 2009 at 11:50 AM, kuanming Li <kli at dal.ca> wrote:

>  dial-peer voice 30 pots
>
>  numbering-type international
>
>  preference 1
>
>  destination-pattern 011T
>
>  port 0/0/0:23
>
> forward-digits all
>
> //or prefix 011
>
>
>
> ======the pots dial-p will remove the 011 when it leave the gateway, so you
> need add the 011 back or forward all.
>
>
>
>
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Wednesday, December 30, 2009 12:54 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] international calling
>
>
>
> on an H323 VGW I have a dail peer
>
>
>
> dial-peer voice 30 pots
>
>  numbering-type international
>
>  preference 1
>
>  destination-pattern 011T
>
>  port 0/0/0:23
>
>
>
> and it looks like I don't get a match on
>
>
>
> 0110289778399
>
>
>
> Why?
>
>
>
> It' should drop the 011 and change the calling number type to
> international.  right?
>
>
>
> am I missing something?
>
>
>
> TIA
>
>
>
> Scott
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091230/5593a2aa/attachment.html>