[cisco-voip] Enable/Disable DND on CME Phone

[Kuanming Li]

try below commands and then test.

2811(config)#ephone X
2811(config-ephone)#button 2f4   //suppose button 2 with ephone-dn 4
  feature-ring  Use 'no dnd feature-ring' to exempt line configured for
                feature-ring from DND ringer suppression
2811(config-ephone)#no dnd feature-ring

  ----- Original Message ----- 
  From: davidytk 
  To: 'Kuanming Li' 
  Cc: cisco-voip at puck.nether.net 
  Sent: Friday, February 06, 2009 1:09 PM
  Subject: RE: [cisco-voip] Enable/Disable DND on CME Phone


  Hi Kuanming

   

  How about if user press DND button, not function on this, How to do this

   

  Thanks

   

  Best Regards

  David

   


------------------------------------------------------------------------------

  From: Kuanming Li [mailto:kli at dal.ca] 
  Sent: Saturday, February 07, 2009 2:04 AM
  To: davidytk
  Subject: Re: [cisco-voip] Enable/Disable DND on CME Phone

   

  create an ephone-template for softkey, remove the DND key from it, then apply it to the ephone. nobody can use DND.

   

    ----- Original Message ----- 

    From: davidytk 

    To: cisco-voip at puck.nether.net 

    Sent: Friday, February 06, 2009 12:13 PM

    Subject: [cisco-voip] Enable/Disable DND on CME Phone

     

    Hi all

     

    I am now using CME 3.3, what command should I disable/enable the DND function on CME phone.

     

    Thanks

    Best Regards

    David


----------------------------------------------------------------------------

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090206/ffcd1887/attachment.html>