[cisco-voip] Upgraded Partition Backout

[Ryan Ratliff]

utils system ?

-Ryan

On Feb 20, 2009, at 3:15 PM, STEVEN CASPER wrote:

On CUCM 6.1.x is there any method to back out an upgrade to an  
inactive partition? I have done this type of upgrade at least half a  
dozen times with never a problem but I am being asked from a change  
management perspective. My original answer of contacting TAC is not  
working for me.

Thanks
Steve



Please consider the impact on our environment before printing this e- 
mail.
************************************ This email may contain  
privileged and/or confidential information that is intended solely  
for the use of the addressee. If you are not the intended recipient  
or entity, you are strictly prohibited from disclosing, copying,  
distributing or using any of the information contained in the  
transmission. If you received this communication in error, please  
contact the sender immediately and destroy the material in its  
entirety, whether electronic or hard copy. This communication may  
contain nonpublic personal information about consumers subject to the  
restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley  
Act. You may not directly or indirectly reuse or disclose such  
information for any purpose other than to provide the services for  
which you are receiving the information. There are risks associated  
with the use of electronic transmission. The sender of this  
information does not control the method of transmittal or service  
providers and assumes no duty or obligation for the security,  
receipt, or third party interception of this transmission.  
************************************
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip