[cisco-voip] SRST Help - inbound with FXO

[Scott Voll]

do you have the service mgcpapp command?

eg.

dial-peer voice 99920 pots
 service mgcpapp
 port 2/0

Scott


On Fri, Jan 9, 2009 at 1:59 PM, Countryman, Edward <
Edward.Countryman at provena.org> wrote:

>  Trying to configure my first site using FXO ports instead of PRI
> trunking.
>
>
>
> The site has no DID numbers and my 8 FXO ports are in a trunk group on the
> router
>
>
>
> In SRST mode, I can make calls but when the main number is called from the
> outside the router rejects the call.
>
>
>
> I thought using "default-destination xxxx" within the
> "call-manager-fallback" would do it but I was incorrect
>
>
>
> Any ideas what I am missing in the config?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090109/6c886bb5/attachment.html>