[cisco-voip] Cisco Unified Servers connection to VSS switch

[Fuermann, Jason]

No port channel, can connect them both though

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Shine Joseph
Sent: Tuesday, July 07, 2009 4:26 PM
To: Voice Noob; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco Unified Servers connection to VSS switch

Sorry. Should have been more specific.
I am refering to 2 x 6500s. Virtual Switching System.

Thanks
----- Original Message -----
From: Voice Noob<mailto:voicenoob at gmail.com>
To: 'Shine Joseph'<mailto:shinejoseph at dodo.com.au> ; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Wednesday, July 08, 2009 5:22 AM
Subject: RE: [cisco-voip] Cisco Unified Servers connection to VSS switch

Is VSS the virtual switch inside Vmware? Or are you talking about two 6500's connected together?

From: Shine Joseph [mailto:shinejoseph at dodo.com.au]
Sent: Tuesday, July 07, 2009 4:20 PM
To: Voice Noob; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Cisco Unified Servers connection to VSS switch

Hi,

Thanks for the wuick response.

That means, I cannot conenct the two nics from the MCS to a VSS. I can use only one NIC to the switch and no port channel. Is taht correct?

Thanks,


----- Original Message -----
From: Voice Noob<mailto:voicenoob at gmail.com>
To: 'Shine Joseph'<mailto:shinejoseph at dodo.com.au> ; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Wednesday, July 08, 2009 5:01 AM
Subject: RE: [cisco-voip] Cisco Unified Servers connection to VSS switch

I don't think you would. It is not supported....YET :)


From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Shine Joseph
Sent: Tuesday, July 07, 2009 3:57 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Cisco Unified Servers connection to VSS switch

Hi,

I am wondering how would one connect CUCM/CUC/CUPS servers to a VSS switch, where a port channel is configured and in MCS you have only NIC failover.

I have searched the archive and couldn't find any references.

Any pointers are welcome.

Thanks in advance,
Shine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090707/f273d36f/attachment.html>