[cisco-voip] CUDAC - Create Queue DDI / CTI Route Points

[Carter, Bill]

Thanks for the response. Actually i had software installation problems. After a clean installation the correct configuration screens appeared.


*****This message was sent wirelessly from my Nokia E61i *****

-----Original Message-----
From: Bennie Grant
Sent: Wed 09/23/2009 7:54 PM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUDAC - Create Queue DDI / CTI Route Points

The CUDAC server will create them for you when you sync it with the CM

On Sep 23, 2009, at 8:35 PM, "Carter, Bill" <bcarter at sentinel.com>  
wrote:

> With Unified Department Attendant Console, how do I create the Queue  
> DDI / CTI Route Points?
>
> Documentation makes reference to them, but I can't find anything  
> about how to create them.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

*************************************************************************
Please consider the environment before printing this e-mail
*************************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.  http://www.mettoni.com

Mettoni Ltd
Registered in England and Wales: 4485956
9400 Garsington Road, Oxford Business Park, Oxford, OX4 2HN
*************************************************************************