[cisco-voip] MGCP PRI Busy-Out

[Lelio Fulgenzi]

search the archives for "maintenance" i've posted one solution a few times.... 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Nikola Stojsin" <nikola at att.net> 
To: cisco-voip at puck.nether.net 
Sent: Monday, January 18, 2010 6:51:01 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] MGCP PRI Busy-Out 

A quick question ? is there a way to ?busy-out? specific channels on a 
PRI while using MGCP (I vaguely remember reading about it somewhere, 
but I cannot remember where). 

Thank you, as always, 
Nikola 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100118/a8d1ebc3/attachment.html>