[cisco-voip] dtmf-interworking command

[Nick Matthews]

This is a 12.4(20)T command, and yes you need the T train.

It's typically used with Verizon networks and I know they're suggesting
12.4(20)T4 as of now.


-nick

On Mon, Mar 1, 2010 at 11:24 AM, <george.hendrix at l-3com.com> wrote:

>  Hi all,
>
>
>
>   I have a router which I need to insert the command *“dtmf-interworking
> rtp-nte”* under the dial peer configuration.  I have upgraded the IOS to
> 12.4(25c) which is the latest release for the train I am running on this
> router.  However, the command doesn’t show and isn’t accepted either.
> Having said that, documentation I have read states the command isn’t
> supported if high density transcoding is enabled on the router, which it is
> on this router.  I would think the command would still show, but just be
> rejected with a message.  Do I need to move to the T IOS train or some other
> train to get this command?
>
>
>
> Thanks,
>
>
>
> Bill Hendrix
>
> [image: STRATIS - Horizontal with Tag line]
>
> george.hendrix at l-3com.com
>
> W: 813-281-3109  C: 813-205-0979
>
> STRATIS Service Desk: 1-800-871-9983
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100301/9463d2b9/attachment.html>