[cisco-voip] Mixing PVDM types in a 2811

[Nick Matthews]

Yes.  Technically you can even share the resources of a card that is
on the motherboard with DSPs on a NM.  This is the purpose of the 'dsp
services dspfarm' command.



On Tue, Mar 16, 2010 at 10:22 AM, Mark Holloway <mh at markholloway.com> wrote:
> Is it possible to populate a 2811 with PVDM2 modules as well as an NM-HDV with PVDM-12 modules and utilize both sets of DSP's?  For example, configure all the PVDM2's for transcoding and the PVDM-12's for conferencing.
>
> Thanks,
> Mark
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>