[cisco-voip] 2911 VGW in CUCM 7

[ccieid1ot]

For h.323 gateway

you need h323-gateway voip interface and h323-gateway voip bind source <ip>

Then just add the gateway as h323, make sure you use the corresponding
IP as the one configured in the bind source command.

Don't shoot me if I get the syntax wrong.  :P

On Thu, Mar 25, 2010 at 12:00 PM, H, Tim <TimH at trstone.com> wrote:
> Any good documentation on setting up an H323 Gateway.  Something I've never done before.
>
> Also, is it a major upgrade from 7.02 to 7.13 or is mainly just like a service pack type of update?
>
> Thanks,
>
> Tim
>
> -----Original Message-----
> From: Erick B. [mailto:erickbee at gmail.com]
> Sent: Thursday, March 25, 2010 11:11 AM
> To: H, Tim
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] 2911 VGW in CUCM 7
>
> You could also use H323
>
>
> On Thu, Mar 25, 2010 at 10:09 AM, Erick B. <erickbee at gmail.com> wrote:
>> You need to upgrade your Call Manager to 7.1.3 or 8.0 to get support
>> for those new model routers.
>>
>> http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf
>>
>>
>>
>> On Thu, Mar 25, 2010 at 9:57 AM, H, Tim <TimH at trstone.com> wrote:
>>> I have a problem currently.  I do not have an option for a 2911 Gateway in
>>> CUCM 7.0.  How would I configure a VGW that call manager does not recognize?
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Tim
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>