[cisco-voip] FXO ports and registering with CCM

[Lelio Fulgenzi]

yes, multiple IPs - so I have bound MGCP to one of the loop back addresses. 

it's this loop back address is the one that is allowed to TFTP to the callmanager. 

i do not have a domain configured on the router, so i should be ok. 

although i didn't see any registration information on a "show mgcp" 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Scott Voll" <svoll.voip at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Sunday, March 28, 2010 12:03:44 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] FXO ports and registering with CCM 


are there multiple IPs on the router? (if so, need to bind to IP) hostname correct? (double check). 

Scott 


On Sat, Mar 27, 2010 at 5:27 PM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 




I've finished configuring a couple of FXO port (with Ground Start) and CUCM has an IP address for the ports, but they're not registered yet. I have put the appropriate MGCP and ccm-manager commands based on another router and CCO documents. 

I have two questions: 


    • should these ports register unplugged or do I have to plug in the trunk line before they will register? 
    • I noticed some TFTP errors on the MGCP status, I'm thinking that's not good (see below config) 



! 
voice-port 0/2/0 
signal groundStart 
! 
voice-port 0/2/1 
signal groundStart 
! 
ccm-manager fallback-mgcp 
ccm-manager mgcp 
ccm-manager config server 10.104.91.105 
ccm-manager config 
! 
mgcp 
mgcp call-agent 10.104.91.105 2427 service-type mgcp version 0.1 
mgcp fax t38 ecm 
mgcp bind control source-interface Loopback104 
mgcp bind media source-interface Loopback104 
mgcp behavior g729-variants static-pt 
! 
mgcp profile default 
! 
dial-peer voice 9020 pots 
service mgcpapp 
port 0/2/0 
! 
dial-peer voice 9021 pots 
service mgcpapp 
port 0/2/1 
! 

vgw-jnhn-a#show ccm-manager config-download 
Configuration Auto-Download Information 
======================================= 
No configurations downloaded 
Current state: Downloading XML file 
Configuration Download statistics: 
Download Attempted : 1 
Download Successful : 0 
Download Failed : 0 
TFTP Download Failed : 3 
Configuration Attempted : 0 
Configuration Successful : 0 
Configuration Failed(Parsing): 0 
Configuration Failed(config) : 0 
Last config download command: 
Configuration Error History: 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100328/2d351cbc/attachment.html>