[cisco-voip] FXO ports and registering with CCM
Mike King
me at mpking.com
Tue Mar 30 09:56:19 EDT 2010
BIX 1A?
Your using NORDX/Nortel BIX strips for your data wiring? I know it's cat 5 /
cat 6 rated, but I've never seen it terminated that way, only for phone
wiring fields.
On Mon, Mar 29, 2010 at 5:59 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> Thanks for everyone's help on this.
>
> In the end, turns out I was looking at the wrong ACL when I first made my
> assumption that a previous router was using the loopback address in the MGCP
> bind statement for TFTP.
>
> All I had to do was use the TFTP source-interface command and all was good.
> That means all TFTP packets come from this interface, but that's OK. I just
> updated our mgmt ACLs to store our configs to allow the loopbacks.
>
> I also had to update the CCM Server information from hostname to IP address
> in order to keep things working once they registered, otherwise, they
> reverted to hostname and stopped working.
>
> I also forgot that MGCP writes dial-peers automatically for the ports you
> want and adds the "service mgcpapp" in there for you.
>
> My next task is to get these ports working in SRST mode - I believe I need
> another set of dial-peers for that.
>
> Again, thanks.
>
> Lelio
>
> P.S. It's amazing how a 5 mm (1/32 ") piece of cross-connect cable can
> waste half an hour of your time. The BIX 1A that was set up for me had a
> small piece of cross-connect cable completing the circuit on the first pair.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
> - LFJ (with apologies to Mr. Popeil)
>
>
> ----- Original Message -----
> From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> To: "Chris Ward (chrward)" <chrward at cisco.com>
> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> Sent: Monday, March 29, 2010 10:25:38 AM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] FXO ports and registering with CCM
>
> thanks Chris, et al.
>
> I'm just going through the document.
>
> I'm guessing changing from hostname to ip address is less daunting then
> changing the IP address from A to B.
>
> Plus, I have no subscribers.
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
> - LFJ (with apologies to Mr. Popeil)
>
>
> ----- Original Message -----
> From: "Chris Ward (chrward)" <chrward at cisco.com>
> To: "Mathew Miller" <miller.mathew at gmail.com>, "Lelio Fulgenzi" <
> lelio at uoguelph.ca>
> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> Sent: Monday, March 29, 2010 10:20:33 AM GMT -05:00 US/Canada Eastern
> Subject: RE: [cisco-voip] FXO ports and registering with CCM
>
> “CCMAdmin – System – Server” is the menu structure to make the change.
>
>
>
> +Chris
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Mathew Miller
> *Sent:* Monday, March 29, 2010 10:14 AM
> *To:* Lelio Fulgenzi
> *Cc:* cisco-voip voyp list
> *Subject:* Re: [cisco-voip] FXO ports and registering with CCM
>
>
>
> That is because you have your CallManagers as hostnames instead of IP
> addresses. You would need to change them in CallManager and reset the
> gateway.
>
>
>
>
>
> On Mar 29, 2010, at 9:03 AM, Lelio Fulgenzi wrote:
>
>
>
> ok. so that helped me get the file. i'll have to figure out what address
> is trying to connect without that later.
>
> but now, after the config is downloaded, it changes the MGCP hosts from IP
> addresses to hostnames.
>
> i honestly can't recall how i completed my install, but i'll have to figure
> out how to change from name to ip address.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
> - LFJ (with apologies to Mr. Popeil)
>
>
> ----- Original Message -----
> From: "Erick B." <erickbee at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "Nick Matthews" <matthnick at gmail.com>, "cisco-voip voyp list" <
> cisco-voip at puck.nether.net>
> Sent: Sunday, March 28, 2010 11:54:32 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] FXO ports and registering with CCM
>
> Ah, okay...
>
> Well, just in case, this router IOS command may be handy...
>
> ip tftp source-interface interface.......
>
>
> On Sun, Mar 28, 2010 at 10:41 PM, Lelio Fulgenzi <lelio at uoguelph.ca>
> wrote:
> > yeah, thought about that, but the router doesn't have tftp access to that
> > host.
> >
> > only the loopback that i've binded to MGCP has access.
> >
> > some network captures tomorrow will tell me MGCP is using this address or
> > not.
> >
> > ---
> > Lelio Fulgenzi, B.A.
> > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > Cooking with unix is easy. You just sed it and forget it.
> > - LFJ (with apologies to Mr. Popeil)
> >
> >
> > ----- Original Message -----
> > From: "Erick B." <erickbee at gmail.com>
> > To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> > Cc: "Nick Matthews" <matthnick at gmail.com>, "cisco-voip voyp list"
> > <cisco-voip at puck.nether.net>
> > Sent: Sunday, March 28, 2010 11:33:47 PM GMT -05:00 US/Canada Eastern
> > Subject: Re: [cisco-voip] FXO ports and registering with CCM
> >
> > You can try to copy the file from the server via TFTP to router flash
> > to see if TFTP is working, or your PC with a TFTP client (tftpd32)
> >
> >
> > On Sun, Mar 28, 2010 at 10:19 PM, Lelio Fulgenzi <lelio at uoguelph.ca>
> wrote:
> >> c3900-universalk9-mz.SPA.150-1.M.bin
> >>
> >> not sure how to read the debug output. i'm still betting it's a TFTP
> >> connection issue. somewhere down the line there's an issue.
> >>
> >> ________________________________
> >> Mar 28 23:15:05.167: MGCP Packet sent to 10.104.91.105:2427--->
> >> NTFY 527895166 *@vgw-jnhn-a MGCP 0.1
> >> X: 0
> >> O:
> >> <---
> >>
> >> Mar 28 23:15:05.167: MGCP Packet received from 10.104.91.105:2427--->
> >> 200 527895166
> >> <---
> >>
> >> Mar 28 23:15:20.167: MGCP Packet sent to 10.104.91.105:2427--->
> >> NTFY 527895167 *@vgw-jnhn-a MGCP 0.1
> >> X: 0
> >> O:
> >> <---
> >>
> >> Mar 28 23:15:20.167: MGCP Packet received from 10.104.91.105:2427--->
> >> 200 527895167
> >> <---
> >>
> >> Mar 28 23:15:35.167: MGCP Packet sent to 10.104.91.105:2427--->
> >> NTFY 527895168 *@vgw-jnhn-a MGCP 0.1
> >> X: 0
> >> O:
> >> <---
> >>
> >> Mar 28 23:15:35.167: MGCP Packet received from 10.104.91.105:2427--->
> >> 200 527895168
> >> <---
> >>
> >> Mar 28 23:15:50.167: MGCP Packet sent to 10.104.91.105:2427--->
> >> NTFY 527895169 *@vgw-jnhn-a MGCP 0.1
> >> X: 0
> >> O:
> >> <---
> >>
> >> Mar 28 23:15:50.167: MGCP Packet received from 10.104.91.105:2427--->
> >> 200 527895169
> >> <---
> >>
> >> Mar 28 23:16:05.167: MGCP Packet sent to 10.104.91.105:2427--->
> >> NTFY 527895170 *@vgw-jnhn-a MGCP 0.1
> >> X: 0
> >> O:
> >> <---
> >>
> >> Mar 28 23:16:05.167: MGCP Packet received from 10.104.91.105:2427--->
> >> 200 527895170
> >> <---
> >>
> >> ________________________________
> >> ---
> >> Lelio Fulgenzi, B.A.
> >> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> >> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> >> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >> Cooking with unix is easy. You just sed it and forget it.
> >> - LFJ (with apologies to Mr. Popeil)
> >>
> >>
> >> ----- Original Message -----
> >> From: "Nick Matthews" <matthnick at gmail.com>
> >> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> >> Cc: "Mark Turpin" <mark.turpin at calence.com>, "cisco-voip voyp list"
> >> <cisco-voip at puck.nether.net>
> >> Sent: Sunday, March 28, 2010 11:06:43 PM GMT -05:00 US/Canada Eastern
> >> Subject: Re: [cisco-voip] FXO ports and registering with CCM
> >>
> >> And by _ivs I meant _li, sorry.
> >>
> >> On Sun, Mar 28, 2010 at 11:06 PM, Nick Matthews <matthnick at gmail.com>
> >> wrote:
> >>> Long shot - any chance your IOS image has _ivs in it? In MGCP you
> >>> have to disable this capability manually for MGCP to register
> >>> correctly.
> >>>
> >>> Otherwise 'debug mgcp packet' is going to be more useful.
> >>>
> >>> -nick
> >>>
> >>> On Sun, Mar 28, 2010 at 8:21 PM, Lelio Fulgenzi <lelio at uoguelph.ca>
> >>> wrote:
> >>>> yup.
> >>>>
> >>>> ---
> >>>> Lelio Fulgenzi, B.A.
> >>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> >>>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> >>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >>>> Cooking with unix is easy. You just sed it and forget it.
> >>>> - LFJ (with apologies to Mr. Popeil)
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>> From: "Mark Turpin" <mark.turpin at Calence.com>
> >>>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "Erick B."
> >>>> <erickbee at gmail.com>
> >>>> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> >>>> Sent: Sunday, March 28, 2010 8:13:26 PM GMT -05:00 US/Canada Eastern
> >>>> Subject: RE: [cisco-voip] FXO ports and registering with CCM
> >>>>
> >>>> Lelio,
> >>>>
> >>>>
> >>>>
> >>>> Have you tried the ‘no mgcp’ / ‘mgcp’ process?
> >>>>
> >>>>
> >>>>
> >>>> -mark
> >>>>
> >>>>
> >>>>
> >>>> From: cisco-voip-bounces at puck.nether.net
> >>>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio
> Fulgenzi
> >>>> Sent: Sunday, March 28, 2010 2:28 PM
> >>>> To: Erick B.
> >>>> Cc: cisco-voip voyp list
> >>>> Subject: Re: [cisco-voip] FXO ports and registering with CCM
> >>>>
> >>>>
> >>>>
> >>>> that's what's weird. neither of the ports show registered in CCM.
> >>>>
> >>>> i'm gonna concentrate on fixing the TFTP errors (or at least seeing if
> >>>> there
> >>>> are any firewall exceptions) tomorrow.
> >>>>
> >>>> ---
> >>>> Lelio Fulgenzi, B.A.
> >>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> >>>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> >>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >>>> Cooking with unix is easy. You just sed it and forget it.
> >>>> - LFJ (with apologies to Mr. Popeil)
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>> From: "Erick B." <erickbee at gmail.com>
> >>>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> >>>> Cc: "Scott Voll" <svoll.voip at gmail.com>, "cisco-voip voyp list"
> >>>> <cisco-voip at puck.nether.net>
> >>>> Sent: Sunday, March 28, 2010 3:09:42 PM GMT -05:00 US/Canada Eastern
> >>>> Subject: Re: [cisco-voip] FXO ports and registering with CCM
> >>>>
> >>>> So you get the FXO port working?
> >>>>
> >>>> It saids registered, so at least one port is registered right?
> >>>>
> >>>> On Sun, Mar 28, 2010 at 2:01 PM, Lelio Fulgenzi <lelio at uoguelph.ca>
> >>>> wrote:
> >>>>> cool. thanks. it has what I have configured in ccm, just the
> hostname,
> >>>>> no
> >>>>> domain name.
> >>>>>
> >>>>> ________________________________
> >>>>> vgw-jnhn-a#show ccm-manager
> >>>>> MGCP Domain Name: vgw-jnhn-a
> >>>>> Priority Status Host
> >>>>> ============================================================
> >>>>> Primary Registered 10.104.91.105
> >>>>> First Backup None
> >>>>> Second Backup None
> >>>>> ________________________________
> >>>>>
> >>>>>
> >>>>> ---
> >>>>> Lelio Fulgenzi, B.A.
> >>>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> >>>>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> >>>>>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >>>>> Cooking with unix is easy. You just sed it and forget it.
> >>>>> - LFJ (with apologies to Mr. Popeil)
> >>>>>
> >>>>>
> >>>>> ----- Original Message -----
> >>>>> From: "Erick B." <erickbee at gmail.com>
> >>>>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> >>>>> Cc: "Scott Voll" <svoll.voip at gmail.com>, "cisco-voip voyp list"
> >>>>> <cisco-voip at puck.nether.net>
> >>>>> Sent: Sunday, March 28, 2010 12:45:35 PM GMT -05:00 US/Canada Eastern
> >>>>> Subject: Re: [cisco-voip] FXO ports and registering with CCM
> >>>>>
> >>>>> The first line on 'show ccm' shows the MGCP domain name, that needs
> to
> >>>>> match the name configured on CUCM.
> >>>>>
> >>>>>
> >>>>> On Sun, Mar 28, 2010 at 9:54 AM, Lelio Fulgenzi <lelio at uoguelph.ca>
> >>>>> wrote:
> >>>>>> yes, multiple IPs - so I have bound MGCP to one of the loop back
> >>>>>> addresses.
> >>>>>>
> >>>>>> it's this loop back address is the one that is allowed to TFTP to
> the
> >>>>>> callmanager.
> >>>>>>
> >>>>>> i do not have a domain configured on the router, so i should be ok.
> >>>>>>
> >>>>>> although i didn't see any registration information on a "show mgcp"
> >>>>>>
> >>>>>> ---
> >>>>>> Lelio Fulgenzi, B.A.
> >>>>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G
> 2W1
> >>>>>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> >>>>>>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >>>>>> Cooking with unix is easy. You just sed it and forget it.
> >>>>>> - LFJ (with apologies to Mr. Popeil)
> >>>>>>
> >>>>>>
> >>>>>> ----- Original Message -----
> >>>>>> From: "Scott Voll" <svoll.voip at gmail.com>
> >>>>>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> >>>>>> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> >>>>>> Sent: Sunday, March 28, 2010 12:03:44 AM GMT -05:00 US/Canada
> Eastern
> >>>>>> Subject: Re: [cisco-voip] FXO ports and registering with CCM
> >>>>>>
> >>>>>> are there multiple IPs on the router? (if so, need to bind to IP)
> >>>>>> hostname
> >>>>>> correct? (double check).
> >>>>>>
> >>>>>> Scott
> >>>>>>
> >>>>>> On Sat, Mar 27, 2010 at 5:27 PM, Lelio Fulgenzi <lelio at uoguelph.ca>
> >>>>>> wrote:
> >>>>>>>
> >>>>>>> I've finished configuring a couple of FXO port (with Ground Start)
> >>>>>>> and
> >>>>>>> CUCM has an IP address for the ports, but they're not registered
> yet.
> >>>>>>> I
> >>>>>>> have
> >>>>>>> put the appropriate MGCP and ccm-manager commands based on another
> >>>>>>> router
> >>>>>>> and CCO documents.
> >>>>>>>
> >>>>>>> I have two questions:
> >>>>>>>
> >>>>>>> should these ports register unplugged or do I have to plug in the
> >>>>>>> trunk
> >>>>>>> line before they will register?
> >>>>>>> I noticed some TFTP errors on the MGCP status, I'm thinking that's
> >>>>>>> not
> >>>>>>> good (see below config)
> >>>>>>>
> >>>>>>> ________________________________
> >>>>>>> !
> >>>>>>> voice-port 0/2/0
> >>>>>>> signal groundStart
> >>>>>>> !
> >>>>>>> voice-port 0/2/1
> >>>>>>> signal groundStart
> >>>>>>> !
> >>>>>>> ccm-manager fallback-mgcp
> >>>>>>> ccm-manager mgcp
> >>>>>>> ccm-manager config server 10.104.91.105
> >>>>>>> ccm-manager config
> >>>>>>> !
> >>>>>>> mgcp
> >>>>>>> mgcp call-agent 10.104.91.105 2427 service-type mgcp version 0.1
> >>>>>>> mgcp fax t38 ecm
> >>>>>>> mgcp bind control source-interface Loopback104
> >>>>>>> mgcp bind media source-interface Loopback104
> >>>>>>> mgcp behavior g729-variants static-pt
> >>>>>>> !
> >>>>>>> mgcp profile default
> >>>>>>> !
> >>>>>>> dial-peer voice 9020 pots
> >>>>>>> service mgcpapp
> >>>>>>> port 0/2/0
> >>>>>>> !
> >>>>>>> dial-peer voice 9021 pots
> >>>>>>> service mgcpapp
> >>>>>>> port 0/2/1
> >>>>>>> !
> >>>>>>> ________________________________
> >>>>>>> vgw-jnhn-a#show ccm-manager config-download
> >>>>>>> Configuration Auto-Download Information
> >>>>>>> =======================================
> >>>>>>> No configurations downloaded
> >>>>>>> Current state: Downloading XML file
> >>>>>>> Configuration Download statistics:
> >>>>>>> Download Attempted : 1
> >>>>>>> Download Successful : 0
> >>>>>>> Download Failed : 0
> >>>>>>> TFTP Download Failed : 3
> >>>>>>> Configuration Attempted : 0
> >>>>>>> Configuration Successful : 0
> >>>>>>> Configuration Failed(Parsing): 0
> >>>>>>> Configuration Failed(config) : 0
> >>>>>>> Last config download command:
> >>>>>>> Configuration Error History:
> >>>>>>> ________________________________
> >>>>>>> ---
> >>>>>>> Lelio Fulgenzi, B.A.
> >>>>>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G
> 2W1
> >>>>>>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> >>>>>>>
> >>>>>>>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >>>>>>> Cooking with unix is easy. You just sed it and forget it.
> >>>>>>> - LFJ (with apologies to Mr. Popeil)
> >>>>>>>
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> cisco-voip mailing list
> >>>>>>> cisco-voip at puck.nether.net
> >>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> cisco-voip mailing list
> >>>>>> cisco-voip at puck.nether.net
> >>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>> _______________________________________________
> >>>> cisco-voip mailing list
> >>>> cisco-voip at puck.nether.net
> >>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>>
> >>>>
> >>>
> >>
> >> _______________________________________________
> >> cisco-voip mailing list
> >> cisco-voip at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>
> >>
> >
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________ cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100330/ad810b55/attachment.html>
More information about the cisco-voip
mailing list