[cisco-voip] voip dial-peer pointing to itself rings as off-net (and ring busy when fwd'd to VM)

[Lelio Fulgenzi]

i've got a few voip dial peers that i need in order to differentiate between 0's on phones. everything works, but when i dial the 0, it rings the destination as an off-net call. i'm guessing because a dial-peer is considered an off-net call leg initiator. 

is there any way to make this an on-net call? i took a look at the dial-peer config statements and none jumped out at me that seemed to relate to this. 

also, when the target is forwarded to VM (CUE on the same box), i get reorder. i'm guessing this is because the codecs are different? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101119/0d52af7c/attachment.html>