[cisco-voip] MGCP echo cancelation

[Erick]

If you are using ccm-manager config, yes.

On Dec 9, 2011, at 8:57 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> Thanks for the follow up.
> 
> Second question.  TAC wants me to update the Echo Cancellers to 128 but CM only has a drop down for up to 64ms.  (CM 7.1.5)  if I put the 128 on the VGW, any time I update the VGW it will get over written, correct?
> 
> I'm troubleshooting DSP issues but I don't want to make this harder than it needs to be.
> 
> Thoughts?
> 
> Scott
> 
> 
> 
> On Thu, Dec 8, 2011 at 6:57 PM, Gr <grccie at gmail.com> wrote:
> Definitely, once you hit apply without doubt, will drop all active calls.
> 
> Sent from my iPhone
> 
> On 09/12/2011, at 8:15 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> 
> > if I change the echo cancellation on a MGCP gw and click apply will it drop calls going on the pri's?
> >
> > TIA
> >
> > Scott
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111209/b1c59dde/attachment.html>