[cisco-voip] E.164 without PSTN access code

Heim, Dennis Dennis.Heim at wwt.com
Thu Oct 4 19:05:43 EDT 2012


I see that works with ATA's. Does it also work on vg224/ios gateway when the port is running in SCCP mode?

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Heim, Dennis
Sent: Thursday, October 04, 2012 11:54 AM
To: Jason Aarons (AM); Nate VanMaren; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] E.164 without PSTN access code

I just found that out, which I think is fantastic.

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>

From: Jason Aarons (AM) [mailto:jason.aarons at dimensiondata.com]<mailto:[mailto:jason.aarons at dimensiondata.com]>
Sent: Thursday, October 04, 2012 11:50 AM
To: Nate VanMaren; Heim, Dennis; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: RE: E.164 without PSTN access code

At the gateway you convert to how carrier wants to see it -jason

The newer loads you can press * for 2 seconds and a plus sign appears on phone display.

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net]<mailto:[mailto:cisco-voip-bounces at puck.nether.net]> On Behalf Of Nate VanMaren
Sent: Thursday, October 04, 2012 10:24 AM
To: Heim, Dennis; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] E.164 without PSTN access code


How does the PSTN handle it?

I have to assume inter digit timeout.

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net]<mailto:[mailto:cisco-voip-bounces at puck.nether.net]> On Behalf Of Heim, Dennis
Sent: Thursday, October 04, 2012 7:29 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] E.164 without PSTN access code

I am thinking of doing E.164 dialing and allowing dialing without a trunk code. My question is how to handle dialing 0 for an operator and the usual international dialing pattern of 011. I know I could do 0#, but that would be a change for users. What have others done regarding this?

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121004/7a2fe39c/attachment.html>


More information about the cisco-voip mailing list