[j-nsp] flexible-ethernet-services on 1000 LH interfaces

[Dan Benson]

Right you all are, thank you for confirming my fear.  Take care. //db

% more messages | grep Illegal
Oct 10 10:08:43  NODE /kernel: ge-0/1/0: Illegal media change.  
Flexible-Ethernet-Services is invalid
Oct 10 10:08:43  NODE /kernel: ge-0/2/0: Illegal media change.  
Flexible-Ethernet-Services is invalid
Oct 10 11:27:57  NODE /kernel: ge-0/1/0: Illegal media change.  
Flexible-Ethernet-Services is invalid
Oct 10 11:27:57  NODE /kernel: ge-0/2/0: Illegal media change.  
Flexible-Ethernet-Services is invalid
Oct 10 11:46:59 NODE  /kernel: ge-0/1/0: Illegal media change.  
Flexible-Ethernet-Services is invalid
Oct 10 11:46:59  NODE /kernel: ge-0/2/0: Illegal media change.  
Flexible-Ethernet-Services is invalid
Oct 10 11:48:26  NODE /kernel: ge-0/1/0: Illegal media change.  
Flexible-Ethernet-Services is invalid
Oct 10 11:48:26  NODE /kernel: ge-0/2/0: Illegal media change.  
Flexible-Ethernet-Services is invalid



On Oct 15, 2008, at 11:00 AM, David Ball wrote:

>  I know that with the PICs on my old m10s, flexible-ethernet-services
> wasn't supported, but it indicated such in /var/log/messages.  You
> seeing anything there?
>
> David
>
>
> 2008/10/15 Dan Benson <dbenson at swingpad.com>:
>> All,
>>
>> I am trying to build l2circuits between a few junipers in my  
>> network without
>> any luck.  In my test case I have M20s with dual LH optic GIGe  
>> interfaces
>> facing a cisco cat 6500 using 802.3ad where I then have vlans  
>> hanging off
>> said switch to service downstream transit customers and, I was  
>> hoping,
>> possible transport customers.
>>
>> Router A:
>> ge-0/1/0 {
>>   gigether-options {
>>       802.3ad ae0;
>>   }
>> }
>> ge-0/2/0 {
>>   gigether-options {
>>       802.3ad ae0;
>>   }
>> ae0 {
>> vlan-tagging;
>> mtu 9100;
>> encapsulation flexible-ethernet-services;
>> aggregated-ether-options {
>>   link-speed 1g;
>> }
>> unit 600 {
>>   encapsulation vlan-ccc;
>>   vlan-id 600;
>> }
>>
>> show configuration protocols l2circuit:
>> neighbor (neighbor lo0) {
>>   interface ae0.600 {
>>       virtual-circuit-id 600;
>>       no-control-word;
>>   }
>> }
>>
>> show l2circuit connections:
>> Layer-2 Circuit Connections:
>>
>> Legend for connection status (St)
>> EI -- encapsulation invalid      NP -- interface h/w not present
>> MM -- mtu mismatch               Dn -- down
>> EM -- encapsulation mismatch     VC-Dn -- Virtual circuit Down
>> CM -- control-word mismatch      Up -- operational
>> VM -- vlan id mismatch           CF -- Call admission control failure
>> OL -- no outgoing label          XX -- unknown
>> NC -- intf encaps not CCC/TCC
>> CB -- rcvd cell-bundle size bad
>>
>> Legend for interface status
>> Up -- operational
>> Dn -- down
>> Neighbor: (neighbor lo0)
>>   Interface                 Type  St     Time last up          # Up  
>> trans
>>   ae0.600(vc 600)           rmt   Up     Oct 10 11:49:07  
>> 2008           1
>>     Local interface: ae0.600, Status: Up, Encapsulation: VLAN
>>     Remote PE: 1(neighbor lo0), Negotiated control-word: No
>>     Incoming label: 275138, Outgoing label: 738273
>>
>> Router B:
>> ge-1/0/0 {
>>   gigether-options {
>>       802.3ad ae0;
>>   }
>> }
>> ge-2/0/0 {
>>   gigether-options {
>>       802.3ad ae0;
>>   }
>> }
>> ae0 {
>>   vlan-tagging;
>>   mtu 9100;
>>   encapsulation flexible-ethernet-services;
>> }
>>   unit 600 {
>>       encapsulation vlan-ccc;
>>       vlan-id 600;
>>   }
>> }
>>
>> show configuration protocols l2circuit:
>> neighbor (neighbor lo0) {
>>   interface ae0.600 {
>>       virtual-circuit-id 600;
>>       no-control-word;
>>   }
>> }
>>
>> show l2circuit connections:
>> Layer-2 Circuit Connections:
>>
>> Legend for connection status (St)
>> EI -- encapsulation invalid      NP -- interface h/w not present
>> MM -- mtu mismatch               Dn -- down
>> EM -- encapsulation mismatch     VC-Dn -- Virtual circuit Down
>> CM -- control-word mismatch      Up -- operational
>> VM -- vlan id mismatch           CF -- Call admission control failure
>> OL -- no outgoing label          XX -- unknown
>> NC -- intf encaps not CCC/TCC
>> CB -- rcvd cell-bundle size bad
>>
>> Legend for interface status
>> Up -- operational
>> Dn -- down
>> Neighbor: (neighbor lo0)
>>   Interface                 Type  St     Time last up          # Up  
>> trans
>>   ae0.600(vc 600)           rmt   Up     Oct 10 10:49:09  
>> 2008           1
>>     Local interface: ae0.600, Status: Up, Encapsulation: VLAN
>>     Remote PE: (neighbor lo0), Negotiated control-word: No
>>     Incoming label: 738273, Outgoing label: 275138
>>
>> MPLS in my network is running without flaw thus far and I have  
>> tested the
>> intercommunication between the M20's and the Cat6500s on both  
>> sides, all
>> working as one would expect.  Do these LH GIGe interfaces not support
>> Flexibility? Do I need to add the "flexible-ethernet-services" to  
>> each
>> interface in the ae?
>>
>> That you much for your time in advance.  //db
>>
>>
>>
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>