From jared at sysmon.org  Thu May 11 18:00:18 2006
From: jared at sysmon.org (Jared Mauch)
Date: Thu, 11 May 2006 18:00:18 -0400
Subject: [Sysmon-announce] sysmon-0.93-pre2 released for testing
Message-ID: <20060511220018.GA29942@puck.nether.net>


	So, as usual i'm always behind and never 
doing much real work to solve issues, but perhaps i'll work
harder now on this.

	Here is sysmon-0.93-pre2, an attempt at a release canidate
for sysmon.  There have been a few changes to some of the
subsystem involved so I wanted to give everyone else a shot at
testing it out.

	Important changes/Fixes/things of note:

     * fix textfile display to properly account for dependencies [1]
     * reduce excessive cpu usage watching wall clock
     * hrmph, qsort fix maybe?
     * stab at fix for timing issue with needssleep() (should reduce cpu usage)

So, those are the notes in the Changelog, but the real important
note for most people is this release should reduce cpu usage
by about 50% for sysmon (maybe higher in some cases).  At least that
was the result in my setup, but I sighup hourly with a large series of
config files, which requires a lot of time spent in the parser.

[1] Changes the way objects are shown in the html file, in some
cases somewhat significantly for users.  I want some feedback on this.
It should supress some alerts, but may not do what you expect.
I may make the "old" way configurable as well.

	hope everyone still enjoys sysmon :)

	- Jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.

From jared at sysmon.org  Thu May 11 18:02:52 2006
From: jared at sysmon.org (Jared Mauch)
Date: Thu, 11 May 2006 18:02:52 -0400
Subject: [Sysmon-announce] [sysmon-help] sysmon-0.93-pre2 released for
	testing
In-Reply-To: <20060511220018.GA29942@puck.nether.net>
References: <20060511220018.GA29942@puck.nether.net>
Message-ID: <20060511220252.GA32482@puck.nether.net>

	Of course it helps if I include the URL:

        ftp://puck.nether.net/pub/jared/beta/sysmon-0.93-pre2.tar.gz

On Thu, May 11, 2006 at 06:00:18PM -0400, Jared Mauch wrote:
> 
> 	So, as usual i'm always behind and never 
> doing much real work to solve issues, but perhaps i'll work
> harder now on this.
> 
> 	Here is sysmon-0.93-pre2, an attempt at a release canidate
> for sysmon.  There have been a few changes to some of the
> subsystem involved so I wanted to give everyone else a shot at
> testing it out.
> 
> 	Important changes/Fixes/things of note:
> 
>      * fix textfile display to properly account for dependencies [1]
>      * reduce excessive cpu usage watching wall clock
>      * hrmph, qsort fix maybe?
>      * stab at fix for timing issue with needssleep() (should reduce cpu usage)
> 
> So, those are the notes in the Changelog, but the real important
> note for most people is this release should reduce cpu usage
> by about 50% for sysmon (maybe higher in some cases).  At least that
> was the result in my setup, but I sighup hourly with a large series of
> config files, which requires a lot of time spent in the parser.
> 
> [1] Changes the way objects are shown in the html file, in some
> cases somewhat significantly for users.  I want some feedback on this.
> It should supress some alerts, but may not do what you expect.
> I may make the "old" way configurable as well.
> 
> 	hope everyone still enjoys sysmon :)
> 
> 	- Jared
> 
> -- 
> Jared Mauch  | pgp key available via finger from jared at puck.nether.net
> clue++;      | http://puck.nether.net/~jared/  My statements are only mine.
> _______________________________________________
> Sysmon-help mailing list
> Sysmon-help at puck.nether.net
> https://puck.nether.net/mailman/listinfo/sysmon-help

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.