<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
1-In the example you see that the time failed column has a value, and because
the device was just off for a few seconds, it shows as NEVER down, BUT the
uptime calculations are showing the device is 98%, which doesn't make sense...
if it was never down it should be 100% right?<br>
<br>
2-In the heading you show last updated value, which is really the last time
you refreashed the screen html wise, is there a way to have it tell you the
REAL time the last check of devices was executed? This would prove more
valuable, and confirm that sysmon is actually running and you are not looking
at OLD info from the last time sysmon was up.<br>
<br>
Thanks<br>
<br>
<br>
<img src="cid:part1.03060108.09060003@InnovativeInternet.com"
alt="screenshot" width="732" height="445">
<br>
<pre class="moz-signature" cols="$mailwrapcol">--
___________________________________________________________
Jack Sasportas
Innovative Internet Solutions
Phone 305.665.2500
Fax 305.665.2551
<a class="moz-txt-link-abbreviated" href="http://www.innovativeinternet.com">www.innovativeinternet.com</a>
<a class="moz-txt-link-abbreviated" href="http://www.web56.net">www.web56.net</a>
</pre>
</body>
</html>