Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #1: Wed Jun 22 14:55:31 MST 2011
    root@:/usr/src/sys/i386/compile/AO751h i386
CPU: Intel(R) Atom(TM) CPU Z520   @ 1.33GHz (1330.03-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x106c2  Family = 6  Model = 1c  Stepping = 2
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40c3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
  AMD Features=0x100000<NX>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 2081193984 (1984 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
ACPI Error: Could not enable PowerButton event (20110527/evxfevnt-216)
ACPI Warning: Could not enable fixed event 0x2 (20110527/evxface-223)
acpi0: Power Button (fixed)
acpi0: reservation of 3f800000, 70800000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xd> port 0x62,0x66 on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0
hdac0: <Intel SCH High Definition Audio Controller> mem 0xb0050000-0xb0053fff at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd0110000-0xd0110fff,0xd0100000-0xd010ffff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 00:23:8b:e5:63:3e
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xd0000000-0xd000ffff at device 0.0 on pci3
ath0: AR2425 mac 14.2 RF5424 phy 7.0
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x0000
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x0000
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x0000
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb0054000-0xb00543ff irq 21 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel SCH UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
acpi_tz0: <Thermal Zone> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Realtek ALC272
pcm0: <HDA Realtek ALC272 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC272 PCM #1 Analog> at cad 0 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST9160314AS 0001SDM1> ATA-8 SATA 2.x device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
xpt_action_default: CCB type 0xe not supported
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 10390822 Hz quality 1000
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
Root mount waiting for: usbus3
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 8 ports with 8 removable, self powered
ugen3.2: <Sonix Technology Co., Ltd.> at usbus3
Root mount waiting for: usbus3
Trying to mount root from ufs:/dev/ad0s1a [rw]...
ugen2.2: <Broadcom Corp> at usbus2
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
xpt_action_default: CCB type 0xe not supported
wlan0: Ethernet address: 00:25:56:0c:4e:88
ath0: device timeout
re0: link state changed to DOWN
ath0: device timeout
re0: link state changed to UP
ath0: device timeout
re0: watchdog timeout
re0: link state changed to DOWN
re0: link state changed to UP
ath0: device timeout
re0: watchdog timeout
re0: link state changed to DOWN
ath0: device timeout
re0: link state changed to UP
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout