At 09:00 PM 4/24/2002 -0700, Ryan Spott wrote:
>Here is what I have:
>
>sho diag
>Slot 0:
> Fast-ethernet on C7200 I/O card with MII or RJ45 Port adapter, 1 port
>
>sho ver
>Cisco Internetwork Operating System Software
>IOS (tm) 7200 Software (C7200-P-M), Version 12.1(2), RELEASE SOFTWARE (fc1)
>
>Here is what I want:
>
>Router(config-if)#int fa 0/0.46
>Router(config-subif)#encapsulation dot1Q 46
> ^
>% Invalid input detected at '^' marker.
>Router(config-subif)#
Works here with the following:
IOS (tm) 7200 Software (C7200-K3P-M), Version 12.0(21)S1, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
interface FastEthernet0/0
description FastE Trunk Link
no ip address
no ip directed-broadcast
full-duplex
no cdp enable
!
interface FastEthernet0/0.1
description VLAN 6
encapsulation dot1Q 6
ip address 10.0.1.1 255.255.255.0
no ip directed-broadcast
!
interface FastEthernet0/0.2
description VLAN 51
encapsulation dot1Q 51
ip address 10.0.2.1 255.255.255.0
no ip directed-broadcast
!
-Chris
--
\\\|||/// \ StarNet Inc. \ Chris Parker
\ ~ ~ / \ WX *is* Wireless! \ Director, Engineering
| @ @ | \ http://www.starnetwx.net \ (847) 963-0116
oOo---(_)---oOo--\------------------------------------------------------
\ Wholesale Internet Services - http://www.megapop.net
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:54 EDT