rate-limit on the interface using access lists to limit traffic that is
matched by the acl
eg: rate-limit input access-group 122 2048000 512000 1024000 conform-action
transmit exceed-action drop
this will limit packets that match ACL122 to 2Mbps. all other packets (ie
that dont match) will not be limited.
there are other methods such as Modular QOS on recent IOS versions using
policing and a service-policy
cheers
Mark
> -----Original Message-----
> From: r.tahina@dts.mg [mailto:r.tahina@dts.mg]
> Sent: 02 May 2002 15:28
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] bandwidth limitation
>
>
> Hi,
>
> I have a client who is connected to our network with a 256 leased-
> line.
> Is there any way to limit his bandwith to 128 to the internet and
> give him the full 256k capacity when using our local resources
> (local mail-ftp-http servers)?
>
> Thanks
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:55 EDT