This documentation is incorrect and we will get it fixed / clarified.
The TCAM that holds the FIB table is capable of holding 256,000 entries.
Without unicast RPF checking turned on the maximum number of unicast
entries that can be held in the hardware FIB table is 244,000. The
remaining 12,000 entries are reserved for multicast routes. If unicast RPF
checking is enabled then the number of routes that are held in the TCAM is
halved.
You can exceed the capacity of the hardware forwarding table, and the
consequences are that the routes that are not programmed into the TCAM that
holds the FIB table will be switched in software by the MSFC2 / RP.
Ian
At 01:45 PM 5/14/2002 -0400, Alex Rubenstein wrote:
>http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/tech/c65sp_wp.htm
>
>
>"... The Catalyst 6500 Family when equipped with a Supervisor Engine 2 can
>provide as many as 128,000 entries in the FIB table ..."
>
>I am sure this is not news to everyone, but things are starting to get
>close.
>
>We're at 111k routes.
>
>Is there a plan for the S2/MSFCx?
>
>
>
>
>
>-- Alex Rubenstein, AR97, K2AHR, alex@nac.net, latency, Al Reuben --
>-- Net Access Corporation, 800-NET-ME-36, http://www.nac.net --
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:57 EDT