RE: [nsp] QoS question

From: Hassan, Shehzad (shehzad.hassan@bell.ca)
Date: Thu May 23 2002 - 11:31:23 EDT

Next message: Sean Crocker: "Re: [nsp] Mapping traffic into MPLS tunnels"
Previous message: Ravichander Vaidyanathan: "Re: [nsp] Mapping traffic into MPLS tunnels"
Maybe in reply to: TMS: "[nsp] QoS question"
Next in thread: Ahmer Ghazi: "RE: [nsp] QoS question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

CBWFQ

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t5/cbwfq.htm#xtocid156600

http://www.cisco.com/warp/public/105/qos_index.shtml

You are not trying to use BGP (QPPB) for setting your QoS are you ?

-----Original Message-----
From: TMS [mailto:tomek@absolut.vinyl.pl]
Sent: Thursday, May 23, 2002 11:20 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] QoS question

Hello

I have some questions about QoS. I have two T1 links (with BGP)
to diffrent ISP's. And I want set on my BGP router diffrent
QoS Policies. For example:

10.10.10.0/24 - subnet with highest priority (nearly guaranted)
10.10.10.1/24 - subnet with normal priority
10.10.10.2/24 - subnet with low priority

Which QoS technic is recommended in my configuration ?

best regards,

TMS

Next message: Sean Crocker: "Re: [nsp] Mapping traffic into MPLS tunnels"
Previous message: Ravichander Vaidyanathan: "Re: [nsp] Mapping traffic into MPLS tunnels"
Maybe in reply to: TMS: "[nsp] QoS question"
Next in thread: Ahmer Ghazi: "RE: [nsp] QoS question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:57 EDT