to copy to bootflash(primary SUP): copy tftp sup-bootflash:
to copy to secondary bootflash(secondary SUP): copy tftp
slavesup-bootflash: or copy sup-bootflash: slavesup-bootflash:
they dont auto-sync at this time.
-t
On Sun, 26 May 2002, Chris Johns wrote:
> Folks,
>
> I am after some advice on upgrading the IOS on a Cat6K which has recently
> been changed from hybridIOS to nativeIOS.
>
> I have 2 supervisor modules and 2 msfc daughter boards. Currently I copy the
> new image to the bootflash, and change the boot command to boot the new
> image. Is there a way to force the bootflash on msfc1 to sync with msfc2
> (using the "remote command" or similar) or do I have to copy the image to
> the bootflash by taking out supervisor1 and making supervisor2 the active
> and copying the new image to its bootflash? I have searched the cisco site
> for relevant documentation but can't find anything useful, can someone point
> me in the right direction or explain a better or more efficient way of doing
> this, I would be greatful.
>
> thanks
> chris
>
>
>
> _________________________________________________________________
> Join the world’s largest e-mail service with MSN Hotmail.
> http://www.hotmail.com
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:58 EDT