At 01:53 AM 27/05/2002 +0200, Dmitri Kalintsev wrote:
>On Sat, May 25, 2002 at 05:04:12PM +1000, Lincoln Dale wrote:
> > connect TX on one end to RX on the other and vice-versa.
> > configure one of the routers for "clocking internal".
>
>Could you please provide a bit more detail?
>
>- Router platforms that support this?
>- NM/PA's supporting this?
>- IOS feature set/version required?
>- Full snippet of a sample config?
>
>I can't seem to get anywhere near making this work using 7200VXR with ATM
>"WAN OC3 (SMI) Port adapter, 1 port" PA, running 12.2(7b) IP Plus image.
exact command is "atm clock internal". you apply it on the physical interface.
as a command, it first appeared in IOS 10.0.
i don't have at hand exactly what platforms support it, but a search on
www.cisco.com for "atm clock internal" shows that it is available at least
on all of:
- PA-A1-OC3MM and PA-A1-OC3SM
- PA-A2-*
- PA-A3-*
- NM-1A-OC3MM-1V, NM-1A-OC3SMI-1V and NM-1A-OC3SML-1V (Single port
OC-3/STM-1 ATM CES NM)
- C10K OC-12 ATM LC
- c5k WS-X5167 and WS-X5168 (ATM OC3 modules)
- ATM CES on MC3810
.. and probably a whole bunch of others.
i've personally used it on an E3 ATM (coax) PA-A3 many many years ago in a
past life.
cheers,
lincoln.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:58 EDT