Re: [nsp] Back to Back ATM over a public SDH Path

From: Félix Izquierdo (fizquierdo@datagrama.net)
Date: Thu May 30 2002 - 02:17:08 EDT

Next message: Peter Lothberg: "Re: [nsp] Back to Back ATM over a public SDH Path"
Previous message: MPLS Newbie: "[nsp] Can you mix POS,ATM and Ethernet interfaces in a vlan on a catalyst"
In reply to: Kevin Gannon: "[nsp] Back to Back ATM over a public SDH Path"
Next in thread: Kevin Gannon: "[nsp] Back to Back ATM over a public SDH Path"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Kevin Gannon wrote:
>
> I need to run up some ATM between two 7600's , I know I can run this
> up back to back on a desk. The question is will this work over a public
> SDH network also ?
>

Why not? The only difference is that the usual clock configuration in
SDH is to recover clock from network in both sides.

Félix

______________________________________________________________________
DATAGRAMA SERVICIOS GLOBALES IP
C/ Acer 30 Pho: +34 93 289 63 00
08038 Barcelona ( SPAIN ) Fax: +34 93 289 63 10
mailto:fizquierdo@datagrama.net http://www.datagrama.net
______________________________________________________________________

Next message: Peter Lothberg: "Re: [nsp] Back to Back ATM over a public SDH Path"
Previous message: MPLS Newbie: "[nsp] Can you mix POS,ATM and Ethernet interfaces in a vlan on a catalyst"
In reply to: Kevin Gannon: "[nsp] Back to Back ATM over a public SDH Path"
Next in thread: Kevin Gannon: "[nsp] Back to Back ATM over a public SDH Path"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:58 EDT