2522 is an s/t interface right?
What version of IOS is on that box?
Can you send a "debug bri"/"sh int bri2/0" as well?
thanks,
josh
----- Original Message -----
From: "Muhammad Faisal Rauf Danka" <mfrd@attitudex.com>
To: "Josh Duffek" <jduffek@cisco.com>; <mfrd@attitudex.com>;
<cisco-nsp@puck.nether.net>
Cc: <isp-routing@isp-routing.com>
Sent: Wednesday, June 12, 2002 3:56 AM
Subject: Re: [nsp] BRI problem on 3640 series cisco router
> I did as you suggested but no luck.
>
> *Mar 19 20:36:21.003: ISDN BR2/0: Could not bring up interface
> *Mar 19 20:36:23.003: ISDN BR2/0: Could not bring up interface
> *Mar 19 20:36:25.003: ISDN BR2/0: Could not bring up interface
>
> Regards,
> ---------
> Muhammad Faisal Rauf Danka
>
> Chief Technology Officer
> Gem Internet Services (Pvt) Ltd.
> web: www.gem.net.pk
>
> Vice President
> Pakistan Computer Emergency Responce Team (PakCERT)
> web: www.pakcert.org
>
> Chief Security Analyst
> Applied Technology Research Center (ATRC)
> web: www.atrc.net.pk
>
>
> --- "Josh Duffek" <jduffek@cisco.com> wrote:
> >since it's net3 i wouldn't worry about it being down unless you need to
make
> >a call...get this:
> >
> >config t
> >service timestamp debug datetime msec
> >end
> >sh ver | i IOS
> >sh run int bri2/0
> >debug isdn q921
> >debug isdn q931
> >term mon
> >isdn call int bri2/0 xxxyyy !whatever phone number
> >
> >if it doesnt pick up a TEI from the switch and place the call then you
have
> >to worry.
> >
> >josh
> >
> >
> >----- Original Message -----
> >From: "Muhammad Faisal Rauf Danka" <mfrd@attitudex.com>
> >To: <cisco-nsp@puck.nether.net>
> >Cc: <isp-routing@isp-routing.com>
> >Sent: Monday, June 10, 2002 5:03 AM
> >Subject: [nsp] BRI problem on 3640 series cisco router
> >
> >
> >> Dear Fellows
> >>
> >> We just purchased a 3640 router with 4-port BRI ( S/T interface ) card
,
> >we also have a 2522 router with one port BRI card , we have 4 isdn lines,
3
> >of then are siemens, our region is asia and here we are using the
basic-net3
> >switch type , the problem we are facing is that when we plugin our bri
line
> >in 3640 router's bri port its layer 1 and layer 2 don't show up but at
same
> >moment when we plug the same ISDN line into our 2522 router's bri port
its
> >working fine and shows every thing alright,
> >> i am giving you the status of both of my routers bri ports.
> >>
> >> [ 3640 bri port status ]
> >> ------------------------
> >> Global ISDN Switchtype = basic-net3
> >> ISDN BRI2/0 interface
> >> dsl 16, interface ISDN Switchtype = basic-net3
> >> Layer 1 Status:
> >> DEACTIVATED
> >> Layer 2 Status:
> >> Layer 2 NOT Activated
> >> Layer 3 Status:
> >> 0 Active Layer 3 Call(s)
> >> Active dsl 16 CCBs = 0
> >> The Free Channel Mask: 0x80000003
> >> Number of L2 Discards = 0, L2 Session ID = 0
> >>
> >> [ 2522 bri port status ]
> >> ------------------------
> >> Global ISDN Switchtype = basic-net3
> >> ISDN BRI0 interface
> >> dsl 0, interface ISDN Switchtype = basic-net3
> >> Layer 1 Status:
> >> ACTIVE
> >> Layer 2 Status:
> >> TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> >> Layer 3 Status:
> >> 0 Active Layer 3 Call(s)
> >> Activated dsl 0 CCBs = 0
> >> The Free Channel Mask: 0x80000003
> >> Total Allocated ISDN CCBs = 0
> >>
> >>
> >> Note: ISDN line is same.
> >>
> >> Someone suggested me to upgrade my IOS, others suggested that BRI
> >interface card might be faulty.
> >>
> >> Any help is appreciated in this manner.
> >>
> >>
> >> Regards,
> >> ---------
> >> Muhammad Faisal Rauf Danka
> >>
> >> Chief Technology Officer
> >> Gem Internet Services (Pvt) Ltd.
> >> web: www.gem.net.pk
> >>
> >> Vice President
> >> Pakistan Computer Emergency Responce Team (PakCERT)
> >> web: www.pakcert.org
> >>
> >> Chief Security Analyst
> >> Applied Technology Research Center (ATRC)
> >> web: www.atrc.net.pk
> >>
> >> _____________________________________________________________
> >> ---------------------------
> >> [ATTITUDEX.COM]
> >> http://www.attitudex.com/
> >> ---------------------------
> >>
> >> _____________________________________________________________
> >> Promote your group and strengthen ties to your members with
> >email@yourgroup.org by Everyone.net http://www.everyone.net/?btn=tag
>
> _____________________________________________________________
> ---------------------------
> [ATTITUDEX.COM]
> http://www.attitudex.com/
> ---------------------------
>
> _____________________________________________________________
> Promote your group and strengthen ties to your members with
email@yourgroup.org by Everyone.net http://www.everyone.net/?btn=tag
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:59 EDT