mide k
>From: "odusseus"
>To: cisco-nsp@puck.nether.net
>Subject: [nsp] Local director behaviour
>Date: Thu, 27 Jun 2002 13:53:54 +0200
>
>Hi all,
>
>I am using LocalDirector 416 version 4.1.2 from Cisco.
> 10.0.0.10
> .................................
> . .
> . 20.0.0.1 .
>+----------+ +---------+ . +----------------------+ .
>| client n |---------| |--------| Server for n clients | .
>+----------+ |Local | . +----------------------+ .
> |Director | . .
> | | . +------------------------+ .
>+------------+ | |--------| Server for n+1 clients | .
>| client n+1 |-------| | . +------------------------+ .
>+------------+ +---------+ . 20.0.0.2 .
> . .
> .................................
>
>
>I want the local director to send traffic to the server 20.0.0.2 only and only if the server 20.0.0.1 has n connections.
>
>
>So in order to do that I planed to configure the local director this way:
>
> enable
> conf t
> virtual 10.0.0.10:21:0:TCP is
> real 20.0.0.1:21:0:TCP is
> real 20.0.0.2:21:0:TCP is
> bind 10.0.0.10:21:0:TCP 20.0.0.1:21:0:TCP 20.0.0.2:21:0:TCP
> predictor 10.0.0.10:21:0:tcp loaded roundrobin
> weight 20.0.0.1:21:0:tcp
>
>
>But, by doing this I don't see if the local director will all the time check the amount of connections on the server 20.0.0.1 before directing any connection to the next server.
>
>Could someone advise me about this please ?
>
>Thank you.
>
>Regards,
>
>Christophe
>
>____________________________________________________________
>Faites un voeu et puis Voila ! www.voila.fr
>Avec Voila Mail, consultez vos e-mails sur votre mobile Wap.