RE: [nsp] tool to convert config from hybrid to native ios on Cat 6500?

From: Hassan, Shehzad (shehzad.hassan@bell.ca)
Date: Thu Jul 04 2002 - 13:19:59 EDT

Next message: Deepak Jain: "RE: [nsp] Best practices for blocking IM traffic"
Previous message: Rob Thomas: "[nsp] 221/8 allocated to APNIC"
Maybe in reply to: Dani Roisman: "[nsp] tool to convert config from hybrid to native ios on Cat 6500?"
Next in thread: Hassan, Shehzad: "RE: [nsp] tool to convert config from hybrid to native ios on Cat 6500?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Catalyst OS to Cisco IOS Configuration Converter
http://www.cisco.com/cgi-bin/Support/CatCfgConversion/catcfg_xlat.pl

-----Original Message-----
From: Dani Roisman [mailto:dani@roisman.com]
Sent: Tuesday, July 02, 2002 10:50 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] tool to convert config from hybrid to native ios on Cat
6500?

Hello,

We are preparing to undertake the project of converting from Hybrid CatOS
to Native IOS on a 6509 with many interfaces and VLAN's.

I've searched a bit, and haven't been able to find any information on if
there's a tool available that will take in the output of CatOS 'wr net all'
and convert it into Native IOS configuration for pasting in a console or
'conf net' input.

Any info would be helpful.

Thanks

- Dani

Next message: Deepak Jain: "RE: [nsp] Best practices for blocking IM traffic"
Previous message: Rob Thomas: "[nsp] 221/8 allocated to APNIC"
Maybe in reply to: Dani Roisman: "[nsp] tool to convert config from hybrid to native ios on Cat 6500?"
Next in thread: Hassan, Shehzad: "RE: [nsp] tool to convert config from hybrid to native ios on Cat 6500?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:03 EDT