RE: [nsp] Cisco Pix 501 and port redirection

• Next message: Stephen Gill: "RE: [nsp] Trunking protocol"
• Previous message: Josh Duffek: "Re: [nsp] cabling between AUX port and CON port"
• Maybe in reply to: Dennis Schoone: "[nsp] Cisco Pix 501 and port redirection"
• Next in thread: Chris Fairbanks: "RE: [nsp] Cisco Pix 501 and port redirection"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

static (inside,outside) tcp interface 80 192.168.2.1 80 netmask 255.255.255.255 0 0

IIRC you need at least 6.1 code to support this.

        -Chris
        
-----Original Message-----
From: Dennis Schoone [mailto:Dennis@commonknowledge.nl]
Sent: Thursday, July 04, 2002 8:21 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Cisco Pix 501 and port redirection

Hi All..

I'm trying to make my Pix501 redirect it's outside port 80 to an inside address port 80.

My web-server has got an IP address: 192.168.2.1

My Pix has an IP address: 192.168.2.2 (inside) and 1.2.3.4 (outside).

I want all the traffic on 1.2.3.4:80 to be redirected to 192.168.2.1

The Pix does NAT, and I only have 1 public IP address.

Can anyone help me out here?

Met vriendelijke groet,

Dennis Schoone

Common Knowledge B.V.

Koenenkade 8

1081 KH Amsterdam

Tel. 020-4045434

Fax. 020-4045435

• Next message: Stephen Gill: "RE: [nsp] Trunking protocol"
• Previous message: Josh Duffek: "Re: [nsp] cabling between AUX port and CON port"
• Maybe in reply to: Dennis Schoone: "[nsp] Cisco Pix 501 and port redirection"
• Next in thread: Chris Fairbanks: "RE: [nsp] Cisco Pix 501 and port redirection"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:03 EDT