[nsp] Overrun on the Pix 535

From: Roberto Paoletti (roberto.paoletti@mail.wind.it)
Date: Tue Jul 16 2002 - 11:39:06 EDT

Next message: Zhang, Anchi: "RE: [nsp] Overrun on the Pix 535"
Previous message: Stephen Sprunk: "Re: [nsp] Help with Cisco"
Next in thread: Roberto Paoletti: "[nsp] Overrun on the Pix 535"
Maybe reply: Roberto Paoletti: "[nsp] Overrun on the Pix 535"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

    i make to show interface and i saw :
  interface gb-ethernet1 "DMZ-Slot:2" is up, line protocol is up
  Hardware is i82543 rev02 gigabit ethernet, address is 0003.470d.1d87
  IP address 192.168.1.33, subnet mask 255.255.255.248
  MTU 1500 bytes, BW 1 Gbit full duplex
        3341141891 packets input, 13144045776340 bytes, 8518002 no
buffer
        Received 7621 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 30 overrun, 0 ignored, 0 abort
        3694112040 packets output, 2509048378726 bytes, 0 underruns
        input queue (curr/max blocks): hardware (255/255) software (0/0)
        output queue (curr/max blocks): hardware (0/21) software (0/0)

and i don't know the cause of the 30 overrun, because i didn't these
errors in the port switch.
Can someone help me ?

Thanks
Roberto Paoletti

Next message: Zhang, Anchi: "RE: [nsp] Overrun on the Pix 535"
Previous message: Stephen Sprunk: "Re: [nsp] Help with Cisco"
Next in thread: Roberto Paoletti: "[nsp] Overrun on the Pix 535"
Maybe reply: Roberto Paoletti: "[nsp] Overrun on the Pix 535"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:05 EDT