Daniel,
If you just going from LAN to LAN I don't see where you will need
L2TP...(do you need to remotely terminate PPP sessions?) You could
simply configure basic IPSec between the two sites. A sample
configuration is at the link below. You'll find links off that page
detailing more sophisticated setups.
HTH,
Marcus.
http://www.cisco.com/warp/public/707/overload_private.shtml
-----Original Message-----
From: Daniel Cuautle [mailto:dcuautle@adetel.net]
Sent: 20 July 2002 08:09
To: Support Cisco
Subject: [nsp] Configuration IPSec & L2TP
Hi all,
Somebody can help me for configure IPSec & L2TP between 2 LAN with
private IP address, I have cisco 1600 IOS 12.0.
I like some real example for configure this issue.
Thanks
DC
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:05 EDT