On Mon, Jul 22, 2002 at 02:11:45PM +0800, James Caasi wrote:
> Hello,
>
> We are going to implement VLAN mainly to separate the broadcast
> traffic from one segment to another.
>
> We have existing Cisco 2620 (one FastE port) and Cisco layer 2
> switches. We have office users on one segment and some production machines
> on another.
>
> Should I need a layer 3 switch for this connected after the router? Or
> I only need the router to separate the two segments (using VLAN
> configuration) on the layer 2 Cisco switches?
You can use the cisco switch+router vlan to connect
between the interfaces.
i do something similar w/ bay450+7200 here.
- jared
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:05 EDT