On Tue, Sep 07, 1999 at 02:12:46PM -0400, William F. Maton wrote:
> On Tue, 7 Sep 1999, Simon Lockhart wrote:
>
> > What I can't get my head around is the difference in performance between
> > the RSP2 and RSP4, and again between the VIP2-40 and the VIP2-50.
>
> RSP4 gives more memory over the RSP2, and if I remember, a little more
> horsepower. You can say almost the same about the VIP2-50 and the
> VIP2-40.
>
> One handy little (paper-based guide) I use for a quick comparison is the
> "Cisco Products Quick Reference Guide" Unfortunately, mine's getting long
> in the tooth (Nov. 98).
RSP2 is 100Mhz processor, RSP4 is 200Mhz.
VIP2-40 is 100Mhz processor, VIP2-50 is 200Mhz.
Off the top of my head, and I don't work for cisco, so I could be way
wrong.
--
Mike Horwath Admin & Manager @ VISI.com WORK: drechsau@visi.com
IRC: Drechsau http://www.visi.com/ HOME: drechsau@geeks.org
The only Minnesota ISP with public statistics: http://noc.visi.com/
Garbage In -- Gospel Out. - berkeley fortune(6)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:05 EDT