Re: [nsp] Cisco to Bay Vlans

From: Everett Dowd (edowd@clark.net)
Date: Tue Sep 07 1999 - 23:23:14 EDT

Next message: Rogerio Alvarez - EOP23: "[nsp] 2 ospf processes"
Previous message: Deepak Jain: "Re: [nsp] Cisco to Bay Vlans"
In reply to: Mike Gibbs: "[nsp] Cisco to Bay Vlans"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

What you may want to try is set the link port to the bay as a trunk (dot1q)
I'll almost
bet that the trunk link will get the bay talking. I have a similar arrangement
with Cabletron SS9000
and Cat2924M's and unless I set the links as trunks on the catalyst 2924's
they have VLAN problems and disable the ports going to the SS9000's.

Maybe, maybe not...

Mike Gibbs wrote:

> Ok, has anyone had problems getting Baystack 350T vlans to work with a CAT
> 5500? I can't seem to get it working. Basically its a bay 350T connected
> to a cat5500 via fast ether, who is then connected to a 7513 via gigabit
> ether.
>
> I configured the router with both sde and isl (switched between the 2 to
> see if the other worked), using the SAId 100002 for sde, and nothing
> worked. Am I missing something?
>
> Mike Gibbs

--
<><><><><><><><><><><><><><><><><><><><><><><><><><><>
"Failure is not an option"
                  Gene Cranz, Apollo 13 mission
<><><><><><><><><><><><><><><><><><><><><><><><><><><>
Everett Dowd              edowd@clark.net
CCIE #2409                http://www.clark.net/pub/edowd
Just bein' virtual =8^)   Welcome to the 'net
|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|

Next message: Rogerio Alvarez - EOP23: "[nsp] 2 ospf processes"
Previous message: Deepak Jain: "Re: [nsp] Cisco to Bay Vlans"
In reply to: Mike Gibbs: "[nsp] Cisco to Bay Vlans"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:05 EDT