[nsp] tftp boot system inmage

• Next message: Peter Salvage: "[nsp] routing over a WAN link"
• Previous message: Deepak Jain: "Re: part 2 Re: [nsp] Fast Mem on an RSP4"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hello,

On startup for a 4700, I am trying to boot a system image from a tftp
server. Basically, the flash is too small so I can't store the image
in flash.

The tftp times out at boot time, although tftp works fine when the
router is up and running. The tftp server is "directly connected"
via an ethernet port.

So, what am I missing? Is the boot image deficient or do I need
some other command other than the obvious:

boot system fooImage fooServer

?

Thanks,
-mark

Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-P-M), Version 11.3(9)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 07-Apr-99 21:15 by pwade
Image text-base: 0x60008930, data-base: 0x60608000
 
ROM: System Bootstrap, Version 5.3(10) [tamb 10], RELEASE SOFTWARE (fc1)
BOOTFLASH: 4500 Bootstrap Software (C4500-BOOT-M), Version 10.3(10), RELEASE SOFTWARE (fc1)

• Next message: Peter Salvage: "[nsp] routing over a WAN link"
• Previous message: Deepak Jain: "Re: part 2 Re: [nsp] Fast Mem on an RSP4"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:05 EDT