RTS <rts@rdr.net> writes:
> Ok... Agreed that that slot should be empty.
If you type "show ver", the last few lines will be something like:
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
dewalt>
You need to boot the router into romboot ios in order to make the
flash read/write for upgrading. See the 2501 upgrade instructions
that Doug directed you to for more details.
> The router does have something in it that I have never used or seen.
>
> If I do a sh ver it has a line that reads:
>
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
>
> Any ideas what this is??
LAT is terminal server cruft that you don't need to worry about unless
you work in a DEC shop. Even then, you may decide that you want to
ignore it. :)
On a related note:
Q: What's the successor to DECnet Phase V?
A: DECnet Phase Out.
---Rob
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:06 EDT