Thanks everyone that replied. Set up as recommended and it works just
fine :-)
Regards
Peter
----- Original Message -----
From: Basil V. Dolmatov <dol@east.ru>
To: Peter Salvage <wizard@sybaweb.co.za>
Cc: Cisco Mailing List <cisco-nsp@puck.nether.net>
Sent: 05 October 1999 08:41
Subject: Re: [nsp] ACL's
> On Tue, 5 Oct 1999, Peter Salvage wrote:
>
> > Hi all
> >
> > I'm trying to restrict telnet access to our router. What I did was
> > create an access list like so:
> >
> > access-list 13 permit 192.168.0.0 0.0.0.255 which allows only access
> > from that /24.
> >
> > and then...
> >
> > line vty 0 4
> > access-class 13 in
> >
> > However, if I want to restrict access to ONE machine, say
192.168.0.8,
> > what should the above read? access-list 13 permit 192.168.8.0
> > 252.255.255.255??? I can't seem to get my head around the subnet
mask
> > <sigh>
> access-list 13 permit host 192.168.0.8
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:06 EDT