Why not just do 3:2 load sharing with Cisco multipath?
Deepak Jain
AiNET
On Sat, 9 Oct 1999, Terence wrote:
>
> > The University's Astronomical Observatory is connected back
> > to the main campus by T-1 line(s) from Pacific Bell. Til now,
> > we've shared a single T-1 with our campus phone system on a
> > 1 Mbit for data, 500K for the phones basis.
> > The data guys want (surprise) more BW. One option would be
> > to give a full T-1 to the data side by getting a second T-1.
> > That would leave about 1 Mbit/sec unused on the "telco" T-1.
> > Or we could leave the current setup more or less intact and
> > add a second T-1 for data. T-1s on this path cost us about
> > $400 per month.
> .....
> > Any other suggestions?
>
> http://www.larscom.com/t3ft3/t3_megas.htm
>
> ---
> Terence C. Giufre-Sweetser
>
> +-------------------------------+--------------------------+
> | TereDonn Computer Engineering | Phone +61-[0]7-32369366 |
> | 1/128 Bowen St, SPRING HILL | FAX +61-[0]7-32369930 |
> | PO BOX 1054, SPRING HILL 4004 | Mobile +61-[0]414-663053 |
> | Queensland Australia | Mobile +61-[0]414-784461 |
> +-------------------------------+--------------------------+
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:06 EDT