RE: [nsp] OSPF Load balance question

From: STEPHANE BENFREDJ (BENFREDJS@globalknowledge.net)
Date: Mon Nov 05 2001 - 10:16:37 EST

Next message: Ilker Temir: "Re: Simple backup question"
Previous message: Kinczli Zoltán: "snmp: vpdn--l2tp username to ip address mapping"
Maybe in reply to: Birsen Ozturk: "[nsp] OSPF Load balance question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hello Birsen,
the limitation is not due to ospf.
If you look at the list there is a thread "[nsp] cef maximum paths for load
share"
you will find that cef can now support up to 8 parallel paths.

hope this will help
regards,
stephane

-----Message d'origine-----
De : Birsen Ozturk [mailto:birsen.ozturk@is.net.tr]
Envoyé : jeudi 1 novembre 2001 16:27
À : cisco-nsp@puck.nether.net
Objet : [nsp] OSPF Load balance question

Hi All

I have a simple question: Is there a way to make OSPF load balance
over more than 6 equal cost paths?
Thanks in advance.

Birsen Ozturk

Next message: Ilker Temir: "Re: Simple backup question"
Previous message: Kinczli Zoltán: "snmp: vpdn--l2tp username to ip address mapping"
Maybe in reply to: Birsen Ozturk: "[nsp] OSPF Load balance question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:22 EDT