Re: [nsp] 1900 switch upgrade

From: Brian (bri@sonicboom.org)
Date: Mon Nov 12 2001 - 14:57:10 EST

Next message: Paul Ryan: "[nsp] Batch Config Saves"
Previous message: Akbar Mirza: "[nsp] 1900 switch upgrade"
In reply to: Akbar Mirza: "[nsp] 1900 switch upgrade"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Heres a matrix showing features, it shows the number of vlans as 0 for that model....

http://www.cisco.com/au/cpp/matrices/switch_1928.pdf

    Brian
  ----- Original Message -----
  From: Akbar Mirza
  To: 'cisco-nsp@puck.nether.net'
  Sent: Monday, November 12, 2001 4:23 AM
  Subject: [nsp] 1900 switch upgrade

Hi All,

I have a 1900 switch and it is running firmware which does not support VLAN options. I need to configure it for VLAN but it needs to upgraded it to enterprise firmware.

At Cisco site I checked for model numbers: WS-C1912-A there is only standard edition software.

If I try to upgrade to enterprise will it be fine or what are the criteria for upgrade so that I can get vlan functionality.

Best Regards

Akber

Next message: Paul Ryan: "[nsp] Batch Config Saves"
Previous message: Akbar Mirza: "[nsp] 1900 switch upgrade"
In reply to: Akbar Mirza: "[nsp] 1900 switch upgrade"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:23 EDT