Thanks for the reply - I am currently running flash:c2600-js-mz.120-10.bin
which is the Enterprise Plus. Is there a different feature set I need to
use?
Thanks in advance,
Ben.
-----Original Message-----
From: Robert E. Seastrom [mailto:rs@seastrom.com]
Sent: 14 November 2001 04:33
To: Ben Duncan
Cc: cisco-nsp@puck.nether.net
Subject: Re: [nsp] Cisco 2600 IOS 12.010 only opening 5 vc at peak
It used to be that you had to be running a protocol converter load to get
this to work with more than 4 or 5. What flavor of software load are you
running? If you aren't already, have you tried a "J" load?
---rob
"Ben Duncan" <ben@cpp.co.uk> writes:
> Cisco 2600 IOS 12.010 only opening 5 vc at peak
>
> Configuration:
>
>
> Local HOST------------>Cisco ROUTER----------->Remote HOST
> TCP TCP-->X25 Trans X25
>
>
> Performing TCP to X.25 translation on port 7500 to remote host on 30
> vc X.25 line. Maximum number of current transactions from the
> software is being reported as 5. Results of a "show translate"
> command show 4/5 peak. Have tried setting nvc to 8 but the number of
> max translations was still 4/5 peak. When using "debug x25 all"
> "debug translate" "debug serial interface" the following messages are
> output. --tcppad67: pad state 7 not alive-- and also --tcppad67:
> conntop not alive-- I have searched the web for information regarding
> these errors but haven't had any joy. I have installed an Eicon x25
> card in the local host and have tested the x25 circuit and have opened
> all 30 channels. I have also tried written a simple script to
> initiate multiple telnet instances to simulate transactions as the
> local host TCP/IP driver would and it still only opens 5 channels.
> Does the IOS actually support 30 concurrent Vcs??
>
>
> ----------------------------------------------------------------------
> ------
>
> Config Excerpt:
>
> x25 routing
>
> Interface Serial0/0
> no ip address
> no ip directed-broadcast
> encapsulation x25
> no ip mroute-cache
> x25 address xxxxxxxxxxxxxx
> x25 ltc 1024
> x25 htc 1053
> no cdp enable
>
> x25 route yyyyyyyyyyyyyy interface Serial0/0
>
> translate tcp xx.xx.xx.xx port 7500 stream x25 yyyyyyyyyyyyyy quiet
>
>
> ----------------------------------------------------------------------
> ------
>
> show version
>
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-JS-M), Version 12.0(10), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Tue 21-Mar-00 00:00 by phanguye
> Image text-base: 0x80008088, data-base: 0x80B11694
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> York-BMS uptime is 2 weeks, 2 minutes
> System restarted by power-on
> System image file is "flash:c2600-js-mz.120-10.bin"
>
> cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes
> of memory
>
> Processor board ID JAD050414AJ (2087328745)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp). TN3270
> Emulation software. Basic Rate ISDN software, Version 1.1.
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 Serial network interface(s)
> 1 ISDN Basic Rate interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
>
> ----------------------------------------------------------------------
> ------
>
> show translate
>
> Translate From: TCP 172.20.49.13 Port 7500 Stream
> To: X25 yyyyyyyyyyyyyy
> Quiet
> 0/0 users active, 4 peak, 270 total, 0 failures
>
> ----------------------------------------------------------------------
> ------
>
> debug x25 all, debug translate, debug serial interface
>
> 6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad68: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1052
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1052
> 1w6d: tcppad69: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1051
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1051
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: pad state 7 not alive
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad70: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1050
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1050
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1052
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1052
> 1w6d: tcppad68: pad state 7 not alive
> 1w6d: tcppad68: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1052
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1052
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1051
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1051
> 1w6d: tcppad69: pad state 7 not alive
> 1w6d: tcppad69: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1051
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1051
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: pad state 7 not alive
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1050
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1050
> 1w6d: tcppad70: pad state 7 not alive
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1052
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1052
> 1w6d: tcppad68: pad state 7 not alive
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1051
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1051
> 1w6d: tcppad69: pad state 7 not alive
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: pad state 7 not alive
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad68: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad68: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad68: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad68: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
> 1w6d: tcppad67: fork started
> 1w6d: Serial0/0: X.25 O R1 Call (23) 8 lci 1053
> 1w6d: From (14): xxxxxxxxxxxxxx To (14): yyyyyyyyyyyyyy
> 1w6d: Facilities: (0)
> 1w6d: Call User Data (4): 0x01000000 (pad)
> 1w6d: Serial0/0: X.25 I R1 Call Confirm (3) 8 lci 1053
> 1w6d: tcppad67: conntop not alive
> 1w6d: Serial0/0: X.25 O D1 Data (4) Q 8 lci 1053 PS 0 PR 0
> 1w6d: Serial0/0: X.25 I R1 Clear (5) 8 lci 1053
> 1w6d: Cause 0, Diag 0 (DTE originated/No additional information)
> 1w6d: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1053
>
>
>
>
>
>
>
> This is an email from Card Protection Plan Limited; company
> registration number 01490503; registered office Holgate Park, York,
> YO26 4GA; telephone 01904 544500. This message may contain
> information that is confidential. If you are not the intended
> recipient, you may not peruse, use, disseminate, distribute or copy
> this message. If you have received this message in error, please
> notify the sender immediately by email, facsimile or telephone and
> either return or destroy the original message. Card Protection Plan
> Limited accept no responsibility for any changes made to this message
> after it has been sent by the original author.
This is an email from Card Protection Plan Limited; company registration number 01490503; registered office Holgate Park, York, YO26 4GA; telephone 01904 544500. This message may contain information that is confidential. If you are not the intended recipient, you may not peruse, use, disseminate, distribute or copy this message. If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and either return or destroy the original message. Card Protection Plan Limited accept no responsibility for any changes made to this message after it has been sent by the original author.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:23 EDT