[nsp] CEF: Try to CEF switch message

• Next message: Mikael Abrahamsson: "[nsp] MM/SM gbics/cables"
• Previous message: Gyorfy, Shawn: "RE: [nsp] Cisco 7206 Reboot / Bus Error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,
I'm doing some packet debugging on a 7206 and get the following message:

3d00h: CEF: Try to CEF switch 10.0.2.38 from GigabitEthernet1/0

If stuff is CEF switched I usually see the output CEF switched

3d00h: IP: s=10.0.2.38 (local), d=10.0.17.5, len 41, cef process switched

Does anyone know why it is reports the TRY to CEF switch?

I have had a good look on the Cisco site but cannot find that output anywhere.

Regards,

Steve

• Next message: Mikael Abrahamsson: "[nsp] MM/SM gbics/cables"
• Previous message: Gyorfy, Shawn: "RE: [nsp] Cisco 7206 Reboot / Bus Error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:23 EDT