Excellent, that does it.
Thanks much
Ryan O'Connell wrote:
> IIRC, ^^B should work. (^^ is Shift-Control-6) May only work immediately
> after a newline is sent.
>
> On Mon, Nov 19, 2001 at 11:04:00AM -0800, steve francis wrote:
> > Hi.
> >
> > Anyone know the secret of sending an rs-232 break from a cisco terminal
> > server that you are connected to via ssh?
> >
> > When I telnet to the terminal server, and connect to a device on one of
> > its ports, I can send a break from my telnet program (I happen to use
> > teraterm, so I just select the menu option "Send Break"). THis sends
> > the rs232 break to the device on teh cisco terminal server, so if its a
> > router I can interupt its boot process, if its a sun, I can take it to
> > the 'ok' prompt.
> >
> > However, when I ssh to the terminal server, I cannot seem to send a
> > break.
> >
> > Anyone know a way around this?
> >
> > Can I map a function from the terminal server command line, or
> > something?
> >
> > TIA
> >
>
> --
> Ryan O'Connell - CCIE #8174
> <ryan@complicity.co.uk> - http://www.complicity.co.uk
>
> I'm not losing my mind, no I'm not changing my lines,
> I'm just learning new things with the passage of time
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:24 EDT