Re: [nsp] Frame-Relay between Nortel-Cisco

From: Daniel Cuautle (dcuautle@adetel.net)
Date: Mon Nov 26 2001 - 13:33:57 EST

Next message: David Sinn: "RE: [nsp] recommended IOS GSR12008/12012"
Previous message: Stephen Sprunk: "Re: [nsp] tx-ring-limit tuning on ATM PVC"
In reply to: Stephen Sprunk: "Re: [nsp] Frame-Relay between Nortel-Cisco"
Next in thread: Daniel Cuautle: "[nsp] Frame-Relay between Nortel-Cisco"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Do you know on Nortel router?

mtu 1600 or 1506?

management ? annex-a, annex-d, lmi

I have annex-d and intrerface is up but don't response the ping of remote
point.

Regards
dc

Stephen Sprunk wrote:

> Thus spake "Daniel Cuautle" <dcuautle@adetel.net>
> > Somebody know how I can configure routers (nortel-cisco) to have
> > conection point to point with FR?
> > Do you have any tips
>
> Configure the Cisco with "ietf" encapsulation on the PVC, and they should
> talk just fine.
>
> S

text/x-vcard attachment: Card for Daniel Cuautle

Next message: David Sinn: "RE: [nsp] recommended IOS GSR12008/12012"
Previous message: Stephen Sprunk: "Re: [nsp] tx-ring-limit tuning on ATM PVC"
In reply to: Stephen Sprunk: "Re: [nsp] Frame-Relay between Nortel-Cisco"
Next in thread: Daniel Cuautle: "[nsp] Frame-Relay between Nortel-Cisco"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:24 EDT