Eduardo Pannunzio wrote:
>
> Hi all,
>
> I'm trying to make a MPLS lab experience with 2 routers PEs (7513)and 4 CEs (2514) but I believe is not possible to simulate a MPLS-VPN behavior without others routers like P (providers)between the PEs because a Penultime-Hop-popping . Am I correct?
no - it is perfectly possible to have an MPLS VPN with no P devices
(i.e. the PE routers are adjacent.)
> Which is the IOS command that could change the rule (if exist)?
I'm not sure you can control this in IOS?
but in any case it doesn't really matter. MPLS VPN will still work, but
the routers will never actually impose a tunnel label.
Giles
> Thanks in advanced
> Eduardo Pannunzio
> --
>
> Eduardo Pannunzio
> CCNA R&S / WS
>
> _______________________________________________
> Sign-up for your own FREE Personalized E-mail at Mail.com
> http://www.mail.com/?sr=signup
>
> 1 cent a minute calls anywhere in the U.S.!
>
> http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com
-- ================================================================= Giles Heron Principal Network Architect PacketExchange Ltd. ph: +44 7880 506185 "if you build it they will yawn" =================================================================
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:25 EDT